| Customization: | Available |
|---|---|
| Certification: | CCC, RoHS, ISO, CE |
| Power Supply: | No |
|
Still deciding? Get samples of US$ 0/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Soft close rotary damper for medical bed Medical bed need to up and down frequently. How to make it safe and drop slowly. Our damper can work in this situation. TY-57A soft close heavy duty damper Features: 100% performance test Environment test Oil leakage test Lifecycle test>50000 times...
TRD-57A soft close heavy duty damper
|
Model |
Max. torque |
direction |
|
|
TY-57A-303 |
3.0±0.3N·m |
Both way |
|
|
TY-57A-403 |
4.0±0.5 N·m |
Both way |
|
|
TY-57A-503 |
5.0±0.5 N·m |
Both way |
|
|
TY-57A-603 |
6.0±0.5 N·m |
Both way |
|
|
TY-57A-703 |
7.0±0.5 N·m |
Both way |
|
|
TY-57A-803 |
8.0±0.5 N·m |
Both way |
Features:
100% performance test
Environment test
Oil leakage test
Lifecycle test>50000 times
ISO9001:2008
ROHS directive
Max. rotation speed 50rpm
Max. cycle rate 12 cycle/min
Operating temperature -10-50°C
Weight TRD-57A : 75g, TRD-57A : 94g
Main body material Iron (SPFC)
Oil type Silicone oil
Size
How to use the damper
1. Dampers may generate torque in both directions, clockwise, orcounter-clockwise.
2. Please make sure that a shaft attached to a damper has a bearing, as the damper itself is not fitted with one.
3. please refer to the recommended dimensions below when creating a shaft for TRD-57A. Not using the recommended shaft dimensions may cause the shaft to slip out.
|
Shaft's external dimensions |
ø10 0-0.03 |
|
Surface hardness |
HRC55 or higher |
|
Quenching depth |
0.5mm or higher |
|
Surface roughness |
1.0Z or lower |
|
Chamfer end (Damper insertion side |
|
4. To insert a shaft into TRD-57A, insert the shaft while spinning it in the idling direction of the one-way clutch. (Do not force the shaft in from the regular direction. This may damage the oneway clutch.)
5. When using TRD-57A, please ensure that a shaft with specified angular dimensions is inserted in the damper's shaft opening. A wobbling shaft and damper shaft may not allow the lid to slow down properly when closing. Please see the diagrams to the right for the recommended shaft dimensions for a damper.
Damper Characteristics
1. Speed characteristics
A disk damper's torque varies according to the rotation speed. In general, as shown in the graph to the right, the torque increases as the rotation speed increases, and the torque decreases as the rotation speed decreases. Torque at 20rpm is shown in this catalogue. In a
closing lid, the rotation speed is slow when the lid begins to close, resulting in the generation of torque that is smaller than the rated torque.
2. Temperature characteristics
Damper torque (rated torque in this catalogue) varies according to the ambient temperature. As the temperature increases, the torque decreases, and as the temperature decreases, the torque increases. This is because the viscosity of the silicone oil inside the damper varies according to the temperature. The graph to the right illustrates the temperature characteristics.
){kind=link}